| PART |
Description |
Maker |
| PS21342-N |
DIP - IPM
MITSUBISHI SEMICONDUCTOR Power Module TRANSFER-MOLD TYPE INSULATED TYPE
MITSUBISHI SEMICONDUCTOR TRANSFER-MOLD TYPE INSULATED TYPE
Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
Mitsubishi Electric Semiconductor
Powerex Power Semiconductors
|
| PS21963-ET09 PS21963-AET PS21963-CET PS21963-ET PS |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21964-T09 PS21964-CT PS21964-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21997-4 PS21997-4A PS21997-4C PS21997-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21994-4 PS21994-4A PS21994-4C PS21994-4W PS21994 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS20351-N |
DIP - IPM
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| PS21205 |
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semicon...
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| MN103SD0Q MN103SFD0R |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| SI-8050S SI-8150S SI-8000S SI-8090S SI-8120S SI-80 |
3 A SWITCHING REGULATOR, 60 kHz SWITCHING FREQ-MAX, PSFM5
Full-Mold Separate Excitation Switching Type
Full-Mold, Separate Excitation Switching Type
Full-Mold/ Separate Excitation Switching Type
|
SANKEN[Sanken electric]
|
| RPI-124 |
Sensors > Photointerrupters > Linear Phototransistor output
PHOTO INTERRUPTER, DOUBLE-LAYER MOLD TYPE
Photo interrupter/ double-layer mold type
|
Rohm
|
| PS11011 |
Application Specific Intelligent Power Module FLAT-BASE TYPE INSULATED PACKAGE
FLAT-BASE TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
POWEREX[Powerex Power Semiconductors]
|
| SR3517-B SR3517-H |
Red colored diffusion lens type 3mm(T-1) all plastic mold type High luminosity 红色的扩散镜头类型毫米（翻译- 1）的塑料模具型高亮度
|
AUK, Corp.
AUK corp
|
